• 2mm Wool Design Felt End of Bolt

Color Guide

170 Asche

2mm Wool Design Felt End of Bolt

$140.63  USD

These end of bolt lengths are the same quality, full-width felt by the yard only reduced 20% off the price per yard when you purchase all the remaining felt on a bolt. These rolls usually have three yards or less remaining on the bolts and all sales of end of bolt material are final sale. 2mm Wool Design Felt has been discontinued so once the End of Bolts sell out, they will not be restocked.

  • Content 100% Merino or Karacul Wool
  • Origin Germany
  • Thickness 2 mm (1/16 in)
  • Thickness Tolerance ±0.2 mm (±1/125 in)
  • Width 180 cm (70 3/4 in)
  • Width Tolerance ±4 cm (1 3/5 cm)
  • Weight 600 g / m2 (36 oz / lin yd)
  • Backing None
  • Primary Uses Architectural Products
  • Drapery
  • Lifestyle + Home Goods
  • Wrapped Panels + Tackboards
  • Durability Light contract or residential (depending on application)
  • Maintenance Vacuum occasionally to remove general air-borne debris. Should soiling occur, spot clean with mild soap and lukewarm water. Avoid aggressive rubbing as this can continue the felting process and change the surface appearance of the felt. Refer to 100% Wool Design Felt Maintenance + Cleaning for detailed care instructions.
  • Environmental 100% biodegradable, contains no formaldehyde, 100% VOC free, no chemical irritants, and free of harmful substances
  • Contributes to LEED©
  • Download Declare Label
  • Variation Wool felt is a natural material and color variation and inclusions of natural fiber on the surface are evidence of the 100% natural origin of the material. Product color is only indicative, as it is not possible to assure consistency of color in a natural product due to the natural color of raw wool and absorption of dyes. Color matching cannot be guaranteed on shipments and variation will be more pronounced beyond the normal commercial range.
  • Colorfastness to Light Class 4–5 (40 hours)
  • Colorfastness to Crocking Class 3–4 (wet), Class 4–5 (dry)
  • Environmental Living Building Challenge Criteria Compliant
  • Oeko-Tex Standard 100 Certified Product Class II
  • Meets VOC test limits for the CDPH v1.2 method
  • Flammability CAL 117: Pass
  • FAR 25.853(a): Pass (60 second vertical burn), Pass (12 second vertical burn)
  • NFPA 260: Class 1
  • Durability + Strength ASTM D 3511 (Brush Pill Tester): Class 4
  • ASTM D 4966 (Martindale Abrasion Tester Method): 5,000 Grade 4, 10,000 Grade 3.5, 20,000 Grade 2
  • ASTM D 5034 (Grab Test): 105 lbs (avg of warp), 60 lbs (avg of weft)

Ships in 3 business days. End of bolt remnants are sold as is in approximate sizes and are FINAL SALE.

End of Bolts reduced 50% off through December 31—Prices shown reflect discount.

Part of the MillerKnoll collective