• 3mm Wool Design Felt Remnants 1
  • 3mm Wool Design Felt Remnants 2

Color Guide


487 Pfirsich 023 Koralle 945 Drachenfrucht 221 Himbeere 136 Weinrot 209 Bordeaux 102 Kirsche 201 Rot 125 Tomate 179 Hellrot 180 Terracotta 173 Mango 105 Rost 573 Kupfer 116 Orange 495 Abricot 124 Gelb 131 Honig 509 Kamel 550 Ocker 274 Senf 108 Zitrone 403 Mais 535 Sesam 203 Vanille 027 Kartause 384 Lind 713 Kiwi 377 Maigrün 732 Farn 378 Oliv 260 Sprießen 343 D’Grün 435 Smaragd 625 Pinie 248 Jade 472 Minze 575 Salbei 483 Adria 548 Türkis 312 Lagune 345 Pazifik 308 Petrol 698 Dunst 405 Stahl 215 Meer 540 Ozean 533 Indigo 282 D’Blau 111 Traube 626 Azur 647 Kobalt 686 Enzian 272 Royal 286 H’Blau 995 Wasser 458 Bewölkt 284 Himmel 613 Gletscher 551 Eis 113 Immergrün 099 Lila 667 Amethyst 242 Pink 640 Granat 634 Erröten 671 Pfingstrose 255 Flieder 269 Violett 437 Aubergine 250 Trüffelbraun 220 Rehbraun 411 Alpaka 190 Natur-meliert 200 Natur 331 Sahara 311 Mandel 467 Sand 481 Sandstein 100 Wollweiß 110 Rohweiß 160 Beige 529 Champagner 150 Weiß 428 Silber 427 Stein 021 Beton 170 Asche 423 Hellgrau 408 Taupe 175 Graphit 425 Taubengrau 446 Kohle 300 Anthrazit 426 Schwarz

3mm Wool Design Felt Remnants

$70.31  USD

At FilzFelt, we take pride in our environmental story and rather than disposing of our felt remnants and scraps, we repurpose them into sampling and fabulous felt products. But from time to time these remnants pile up so we’ve added them to our shop at discounted prices. This felt is the same quality 100% Wool Design Felt however in narrower widths and odd sizes. Please visit our About section for more information on the manufacturing process and characteristics of 100% Wool Design Felt. Please note that available colors are listed in the pull-down menu and new inventory is added regularly so check back frequently!

  • Content 100% Merino or Karakul Wool
  • Origin Germany
  • Thickness 3 mm (1/8 in)
  • Thickness Tolerance ±0.3 mm (±1/10 in)
  • Weight 840 g / m2 (48 oz / lin yd)
  • Backing None
  • Primary Uses Architectural Products
  • Lifestyle and Home Goods
  • Wallcovering
  • Wrapped Panels + Tackboards
  • Durability Light contract or residential (depending on application)
  • Maintenance Vacuum occasionally to remove general air-borne debris. Should soiling occur, spot clean with mild soap and lukewarm water. Avoid aggressive rubbing as this can continue the felting process and change the surface appearance of the felt. Refer to 100% Wool Design Felt Maintenance + Cleaning for detailed care instructions.
  • Environmental 100% biodegradable, contains no formaldehyde, 100% VOC free, no chemical irritants, and free of harmful substances
  • Contributes to LEED©
  • Download Declare Label
  • Custom Custom colors and custom fabrication including cutting, lamination, stitching, and installation services available
  • Variation Wool felt is a natural material and color variation and inclusions of natural fiber on the surface are evidence of the 100% natural origin of the material. Product color is only indicative, as it is not possible to assure consistency of color in a natural product due to the natural color of raw wool and absorption of dyes. Color matching cannot be guaranteed on shipments and variation will be more pronounced beyond the normal commercial range.
  • Acoustics ASTM C 423: NRC – 0.10, SAA – 0.10
  • Colorfastness to Light Class 4–5 (40 hours)
  • Colorfastness to Crocking Class 3–4 (wet), Class 4–5 (dry)
  • Environmental Living Building Challenge Criteria Compliant
  • Oeko-Tex Standard 100 Certified Product Class II
  • Meets VOC test limits for the CDPH v1.2 method
  • Flammability AS/NZS 3837-1998: Group 2

  • ASTM E 84: Class A (unadhered)

  • CAL 117: Complies

  • CAN/ULC S102-10: FS Rating 20, SD Classification 155

  • EN 13501-1 (Euroclass): B-s1-d0 (flame treated), D-s1-d0 (untreated)
  • FAR 25.853(a): Pass (60 second vertical burn), Pass (12 second vertical burn)
  • Fire Protection Code for Interior Material (China): B1
  • GB/T 5455: B1 (flame treated)
  • ISO 5660.1-2002: Group 3
  • NFPA 260: Class 1
  • NFPA 701: Pass (flame treated)
  • Durability + Strength ASTM 4966 (Martindale Abrasion Tester Method): 5,000 Grade 4, 10,000 Grade 3.5, 20,000 Grade 3.5, 40,000 Grade 3
  • ASTM D 5034 (Grab Test): 243 lb (avg of warp), 214 lb (avg of weft)